Sharp Sighter™
The Sharp Sharp Sighter™ is a new way to measure barrel and Boresight angle directly while leveraging the full angular resolution of your riflescope. Our two modules mount easily to the outside surface of your rifle barrel and your scope eyepiece. This allows you to directly measure the angle of your
barrel using your scope as a measurement tool.
BENEFITS & VIRTUES
Our one model will work with all rifle platforms – it is NOT caliber specific.
Delivers Aiming resolution superior to any device on the market. Typically ~10x finer resolution than your scope adjustments.
Nothing is inserted into the barrel muzzle!
Align any rifle scope to any rifle platform in minutes at home or at the range.
Check zero anywhere with our field – ready system.
Improve marksmanship skill through a thorough understanding of any, and all effects that change your point of impact.
Evaluate subtle effects of handling of the rifle platform on its point of aim.
“when a measurement is improved by a factor of 10, new discoveries are made”
Measure Barrel Angle Directly
Our system allows your riflescope to directly measure the angle of the barrel. We create a secondary image of your reticle plane by reflecting light off a barrel-mounted mirror. Now the angle of the barrel can be measured using your scope adjustment knobs to the minimum resolution of your scope adjustments or your scope reticle.
Initial Boresighting <5MOA Typical
Initial bore-sighting of several rifle platforms shows initial accuracy better than 5 minutes or less than 5” error at 100 yards for initial fired shots.
Precision Boresight <1MOA
Once boresight is established, measure and certify or validate boresight with full resolution of your scope. This value can be transferred to any other optic. Data shows boresight transfer from scope 1 to 3 other scopes with < 1 MOA!
A REVOLUTIONARY TOOL FOR...
Shooters & Marksman
Delivers real-time visual feedback
- Sharp Sighter delivers a real time measurement of scope to barrel alignment
- Measure positional boresight effects (prone, sitting, standing etc.)
- Measure effects of bipod mounting and handling torques
Gunsmiths & Assemblers
Measure effects of assembly and accessories on the point of aim
- Directly Monitor barrel alignment while torquing receiver into stock
- Measure assembled barrel-to-receiver angle and angular stiffness, to assess fitment and torque parameters.
- Measure angular repeatability
Military & Leo Armorer
Initial Bore sighting Device
- Typical results within ~5 MOA
- Can be performed anywhere, indoors or at the range
- Easily done in minutes anywhere
- Repeatability to < 1MOA – transfer scopes or verify point of aim
Sharp Sighter
